Choose a Roll Tube: None roll tube without spline 2" x 20' roll tube with spline 2" x 20' spline for U-joint on crank handle to be welded into 2" roll tube 61 piece bundle - 2" roll tube (2" x 20') Roll Tube 2" - connector 2"x12" 2" roll pipe center reinforcement fixed tube 1 1/8"x20' fixed tube 1 1/8"x20' - bundle 61 pieces Fixed Tube connector 1 1/8"x 12"

Choose a Lock Down Plate: None Aluminum Lock Down Plate 8'

Choose a Ratchet or Strap: None rachet assembly ratchet 2" 10,000# 2" strap with 9' strap and D-ring

Choose a Tarp Bow: None Standard low rise bow kit - 8" rise Standard low rise bow - 8" rise Standard low rise bow shank single bow bracket self tapping bolts for tarp stops aluminum flex bow bracket steel flex bow bracket 102" flex bow

Choose a Tarp Stop: None old style protective cap Tarp stop standard steel offset tarp stop 3" aluminum tarp stop 3" aluminum tarp stop assembly 6" aluminum tarp stop 6" aluminum tarp stop assembly 3" Rubber tarp stop 3" Rubber tarp stop assembly 6" Rubber tarp stop 6" Rubber tarp stop assembly Standard belted style tarp stop assembly 6" off-set belted style tarp stop assembly

Choose a Tarp Stop Part: None EZ Off Tarp Stop bracket Clevis Pin and ring assembly Clevis Pin Clevis pin ring Nylon U clamp self drilling screws

Choose a Crank Handle: None splined crank assembly wit ong, handle 80" extension Flex crank Kit, 54" extension assembly Flex crank Kit, 80" extension assembly Flex crank Kit, 96" extension assembly Doubble Flex crank Kit, 54" extension assembly Doubble Flex crank Kit, 96" assembly

Choose a Crank Handle Part: None crank handle bracket for when not in use Female portion of Knuckle joint Front Roll return Kit 1' of 3/8" shock cord 12' of 3/8" shockcord replacment for roll return (P-6210) 3 - pin to lock u-joint to spline 1 - splined U-Joint 2 - spline for U-joint on crank handle to be welded into 2" roll tube Male and female joint with locking slide and drive pins 4 - Male portion of Knuckle joint 5 - Female portion of Knuckle joint 6 - Slide to lock knuckle joint in place 7 - Lower 20" portion of arm with holes to adjust crank handle 10 - Drive pins __" for pivot and male and female part attachment 9 - Drive pins __" to stop slide in the correct locked position 8 - lower crank arm with grip 24" 8 - lower crank arm with grip 60" 11 - nylon handle grip only

Choose a Light Crank Handle: None PBR style crank handle square Key roll tube square key insert for economy U-joint economy u-joint